Frico PLTB16R Manual page 41

How you select the function you want
is described in the How to set the ther-
mostat/Control functions section.
Floor thermostat - A sensor in the floor meas-
ures the temperature and then regulates
the heating accordingly. If the floor sensor
is connected when the thermostat is turned
on for the first time, this function is selected
automatically. The preset value is 22 °C.
Room thermostat - the thermostat has
built-in sensors for measuring the room's
temperature and controlling the heating.
The control function cannot be selected
when the floor sensor is connected.
Room and floor thermostat - The built-in
sensor regulates the room temperature
and the sensor in the floor functions as a
floor temperature limiter. The limitation
can be set to between 5 °C and 45 °C. The
factory setting of 35 °C gives a surface
temperature of approx. 27 °C. The cut-
out temperature can be changed, see the
How to set the thermostat/Temperature
section.
Important
In rooms with large windows that are ex-
posed to solar insolation, we recommend
the Room and floor thermostat function.
In rooms with wooden flooring, the
Room and floor thermostat function
must always be used.
39