Frico PLTB16R Manual page 38

Turning on and off
Keep the on/off button pressed for one
second to get to standby mode. Return
to normal mode by once again pres-
sing the button for a second.
The heating cannot be controlled in
standby mode. The clock runs as nor-
mal, and selected programmes and set
temperatures are stored in the memory.
Locking the keypad
The keypad can be locked to prevent
anyone touching the buttons by
mistake. This is shown with the LOCK
symbol in the display.
Press and scroll to LOCK. Confirm
with to lock.
Unlock by holding down both arrows
until the LOCK symbol has disappeared.
Temperature
Displaying current temperature (actual
value)
Lock the keypad first. Press . The light
will come on and the current tempera-
ture in the floor (F) is displayed. This is
the case if the thermostat is set to
36