Getting Started - Frico PLTB16R Manual

Getting started

After installation, wait 2-4 weeks
before starting the underfloor heating.
Precisely how long you wait depends
on the type of floor you have and the
instructions for the floor filler. Then
increase the heat gradually. This does
not apply to those who have laid a
wooden/laminate floor on the floor
heating.
There is a quick guide that helps you to
get started easily with the thermostat.
You will find it in the package. The
guide describes the most important
functions and settings.
In order to adapt the underfloor
heating system to your own heating
requirements as much as possible, it
is important that you read the entire
manual.
33