Frico PLTB16R Manual page 37

If the display is empty, it means that
the thermostat is turned off or that it is
not connected to the power supply.
When the thermostat is started for the
first time the display shows the factory
settings as shown in the illustration.
How to enter personal settings is des-
cribed in the How to set the thermostat
section.
There is an explanation of the symbols
on the display in the Symbols section.
Using the buttons
The buttons are used to raise and lower the
temperature as well as to scroll the menus.
You access the menus by pressing the
selection button, . Use the arrows
to scroll to a menu option and then
confirm with to select it. The menu
system is a scrolling system, in other
words you come to all submenus re-
gardless of the direction you scroll.
If you want to exit a menu, scroll until the
display shows END. Then press the selec-
tion button . You can also wait for 30 se-
conds and the menu exits automatically.
How to navigate the menus is described
in the How to set the thermostat section.
35