Weider WESY17010 User Manual page 10

14. Locate the Long "U"-Bracket (57) that is pre-
assembled with a 3 1/2" Pulley (15) and a Cable
Trap (not shown). Route the Long Cable (58)
around the Pulley and through the Long "U"-
Bracket. Be sure that the Cable is in the
groove of the Pulley, that the Cable Trap is
turned to hold the Cable in place, and that the
Cable and Pulley move smoothly.
15. Route the Long Cable (58) around a 3 1/2" Pulley
(15). Using a 3/8" x 1 3/4" Bolt (71) and a 3/8"
Nylon Locknut (21), secure the Pulley to the indi-
cated bracket on the Top Frame (55). Be sure
that the Cable is in the groove of the Pulley
and that the Cable and Pulley move smoothly.
16. Attach the Long Cable (58) to the Weight
Carriage (19) with a 3/8" x 3/4" Bolt (69) and a
3/8" Nylon Locknut (21). Make sure that the Bolt
and the Nylon Locknut are tight.
14
15
57
15
55
21
16
58
21
19
10
58
15
58
Bracket
69
71