Stanley FatMax SFMCD720B-XJ Manual page 11

Technical data
Voltage
No-load speed
Max. torque
Chuck capacity
Max Drilling capacity
Steel/wood
Weight
Charger SFMCB11
Input Voltage
V
AC
Output Voltage
V
DC
Current A
Battery SFMCB201
Voltage
18
V
DC
Capacity Ah 1.5
Type Li-Ion
Level of sound pressure according to EN62841:
Sound pressure (L ) 76.0 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 87.0 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN62841:
2
Drilling into metal (a ) 1.4 m/s
h, D
EC declaration of conformity
%
MACHINERY DIRECTIVE
SFMCD720 Drill
Stanley Europe declares that these products described under
2006/42/EC, EN62841-1:2015, EN62841-2-1 2018+A11 2019.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact Stanley
Europe at the following address or refer to the back of
the manual.
SFMCD720
V
DC
0-600 / 0-2100
-1
Min
Nm
mm
mm
kg 1.2 (without battery)
SFMCB12
230 230
18 18
1.25 2
SFMCB202 SFMCB204 SFMCB206
18 18
2.0 4.0
Li-Ion Li-Ion
2
, uncertainty (K) 1.5 m/s
(Original instructions)
For more information, please contact Stanley at the following
address or refer to the back of the manual.
18V
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Stanley.
80
1.5-13
13 / 40
SFMCB14
230
THE SUPPLY OF MACHINERY (SAFETY)
18
4
18
6.0
Stanley declares that these products described under
"technical data" are in compliance with:
Li-Ion
The Supply of Machinery (Safety) Regulations, 2008, S.I.
EN62841-1:2015, EN62841-2-1 2018+A11 2019.
.These products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
For more information, please contact Stanley at the following
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Stanley.
Vice President Professional Power Tools EANZ GTS
General Manager, Benelux
Stanley, Egide Walschaertsstraat 14-18
2800 Mechelen, Belgium
Declaration of conformity
REGULATIONS 2008
SFMCD720 - Drill
2008/1597 (as amended),
S.I.2016/1091 (as amended).
2012/3032 (as amended).
270 Bath Road, Slough
ENGLISH
Patrick Diepenbach
02.02.2021
Karl Evans
Stanley UK,
Berkshire SL1 4DX
England
02.02.2021
11