Table of Contents
Advertisement
AXIS P32 Dome Camera Series
Configure your device
4. Use the Tone mapping slider to adjust the amount of WDR.
5. To set the amount of WDR, select Low, Medium or High from the WDR level list.
6. If you still have problems, go to Exposure and adjust the Exposure zone to cover the area of interest.
Find out more about WDR and how to use it at axis.com/web-articles/wdr.
Compensate for barrel distortion
Barrel distortion is a phenomenon where straight lines appear increasingly bent closer to the edges of the frame. A wide field of view
often creates barrel distortion in an image. Barrel distortion correction compensates for this distortion.
Note
Barrel distortion correction affects the image resolution and field of view.
1. Go to Video > Image > Image correction.
2. Turn on Barrel distortion correction (BDC).
3. Use the slider to improve the image.
Monitor long and narrow areas
Use corridor format to better utilize the full field of view in a long and narrow area, for example a staircase, hallway, road, or tunnel.
1. Depending on your device, turn the camera or the 3-axis lens in the camera 90° or 270°.
Note
Make sure to aim IR LEDs away from walls or weathershields.
2. If the device doesn't have automatic rotation of the view, go to Video > Installation.
3. Rotate the view 90° or 270°.
Find out more at axis.com/axis-corridor-format.
Verify the pixel resolution
To verify that a defined part of the image contains enough pixels to, for example, recognize the face of a person, you can use the
pixel counter.
8
Advertisement
Table of Contents
