Table of Contents
Advertisement
AXIS P32 Dome Camera Series
The device interface
Note
We recommend you not to turn on Defog in scenes with low contrast, large light level variations, or when the autofocus is
slightly off. This can affect the image quality, for example, by increasing the contrast. Furthermore, too much light can
negatively impact the image quality when defog is active.
Image correction
Important
We recommend you not to use multiple image correction features at the same time, since it can lead to performance issues.
Barrel distortion correction (BDC)
is a lens effect that makes the image appear curved and bent outwards. The condition is seen more clearly when the image is
zoomed out.
Crop
: Use the slider to adjust the correction level. A lower level means that the image width is kept at the expense of
image height and resolution. A higher level means that image height and resolution are kept at the expense of image width.
Remove distortion
of image height and resolution. Bloat means that image height and resolution are kept at the expense of image width.
Electronic image stabilization (EIS)
to use EIS in environments where the device is mounted in an exposed location and subject to vibrations due to, for example,
wind or passing traffic.
Focal length
of view, while a lower value leads to a lower magnification and a wider angle of view.
Stabilizer margin
stabilize. If the product is mounted in an environment with a lot of vibration, move the slider towards Max. As a result, a smaller
scene is captured. If the environment has less vibration, move the slider towards Min.
Straighten image
functionality is useful when it's not possible to mount the camera exactly level. Ideally, straighten the image during installation.
: Click to show a supporting grid in the image.
: Click to hide the grid.
: Turn on to get a straighter image if it suffers from barrel distortion. Barrel distortion
: Use the slider to adjust the correction level. Pucker means that the image width is kept at the expense
: Turn on to get a smoother and steadier image with less blur. We recommend you
: Use the slider to adjust the focal length. A higher value leads to higher magnification and a narrower angle
: Use the slider to adjust the size of the stabilizer margin, which determines the level of vibration to
: Turn on and use the slider to straighten the image horizontally by rotating and cropping it digitally. The
23
Advertisement
Table of Contents
