Table of Contents
Advertisement
AXIS P32 Dome Camera Series
Configure your device
8. Set the prebuffer time to 5 seconds.
9. Set the postbuffer time to 1 minute.
10. Click Save.
Show a text overlay in the video stream when the device detects an object
This example explains how to display the text "Motion detected" when the device detects an object.
Make sure that AXIS Object Analytics is running:
Make sure that AXIS Video Motion Detection is running:
1. Go to Apps > AXIS Object Analytics.
2. Go to Apps > AXIS Video Motion Detection.
3. Start the application if it is not already running.
4. Make sure you have set up the application according to your needs.
Add the overlay text:
1. Go to Video > Overlays.
2. Under Overlays, select Text and click
3. Enter #D in the text field.
4. Choose text size and appearance.
5. To position the text overlay, click
Create a rule:
1. Go to System > Events and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under Application, select Object Analytics.
4. In the list of conditions, under Application, select VMD4.
5. In the list of actions, under Overlay text, select Use overlay text.
6. Select a video channel.
7. In Text, type "Motion detected".
8. Set the duration.
9. Click Save.
Note
If you update the overlay text it will be automatically updated on all video streams dynamically.
Record video when the camera detects loud noises
This example explains how to set up the camera to start recording to the SD card five seconds before it detects loud noise and
to stop two minutes after.
.
and select an option.
12
Advertisement
Table of Contents
