BASIC OPERATION
Press ZOOM button on Top Control or ZOOM L/M button on
1
Remote Control Unit. The message "Zoom" is displayed.
Press ZOOM L button or POINT UP button to make image
2
larger, and press ZOOM M button or POINT DOWN button to
make image smaller.
Press FOCUS button on Top Control or FOCUS L/M button on
1
Remote Control Unit. The message "Focus" is displayed.
Adjust focus of image by pressing FOCUS L/M button or
2
POINT UP/DOWN button(s) .
If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.
Press KEYSTONE L/M button on Remote Control Unit or select
1
Keystone on SETTING menu. (Refer to page 35.) Keystone
dialog box appears.
Correct keystone distortion by pressing KEYSTONE L/M button
2
or POINT UP/DOWN button(s). Press KEYSTONE L button or
POINT UP button to reduce the upper part of image, and press
KEYSTONE M button or POINT DOWN button to reduce the
lower part.
Reduce the upper width with KEYSTONE L button
or POINT UP button.
Press FREEZE button on Remote Control Unit to freeze the picture on-screen. To cancel FREEZE function, press FREEZE
button again or press any other button except the POINT, SELECT, RIGHTCLICK, P-TIMER and LASER buttons.
20
ADJUSTING SCREEN
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
KEYSTONE ADJUSTMENT
Reduce the lower width with KEYSTONE M button
or POINT DOWN button.
PICTURE FREEZE FUNCTION
Zoom
Message disappears after 4 seconds.
Focus
Message disappears after 4 seconds.