Computer Mode; Selecting Input Source; Selecting Computer System - Christie 38-RS1001-02 User Manual

COMPUTER INPUT
DIRECT OPERATION
Select INPUT source by pressing INPUT 1/2 and INPUT 3
buttons on Remote Control Unit.
Select INPUT source by pressing INPUT
Control.
MENU OPERATION
Press MENU button and ON-SCREEN MENU will appear. Press
1
POINT LEFT/RIGHT buttons to select Input and press SELECT
button. Another dialog box INPUT SELECT Menu will appear.
2 Press POINT DOWN button and a red-arrow icon will appear.
Move arrow to INPUT source that you want to select, and then
press SELECT button.
When connecting a computer output [5 BNC Type (Red, Green, Blue,
Horiz. Sync and Vert. Sync.)] from a computer to R/Pr, G/Y, B/Pb, H/HV
and V jacks.
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.
2 Press POINT DOWN button to move a red arrow pointer to Input
2 and then press SELECT button. Source Select Menu will
appear.
3 Press POINT DOWN button and a red-arrow icon will appear.
Move arrow to "RGB", and then press SELECT button.

SELECTING INPUT SOURCE

button on Top
/

SELECTING COMPUTER SYSTEM

WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )
INPUT 1/2 button
INPUT
INPUT 1
INPUT 2
INPUT 3 button
INPUT 3
INPUT Menu icon
INPUT MENU
INPUT Menu icon
Move a pointer (red arrow) to
Input 2 and press SELECT
button.
Input 2
Source Select Menu
Move a pointer to RGB and
press SELECT button.
/ buttons
INPUT 1
INPUT 2
INPUT 3
25