Select Computer System Manually - Christie 38-RS1001-02 User Manual

COMPUTER INPUT
This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, SXGA or UXGA (refer
to "COMPATIBLE COMPUTER SPECIFICATIONS" on page 27). When selecting Computer, this projector automatically
tunes to incoming signal and projects proper image without any special setting. (Some computers need setting manually.)
Note : Projector may display one of following messages.
When projector can not recognize connected signal as
Auto
PC system provided in this projector, Auto PC Adjustment
function operates to adjust projector and message "Auto"
is displayed on SYSTEM Menu icon. (Refer to P28.)
When image is not provided properly, manual adjustment
is required. (Refer to P29 and 30.)
There is no signal input from computer. Make sure
––––
connection of computer and a projector is set correctly.
(Refer to TROUBLESHOOTING on page 46.)
This projector automatically selects PC system among those provided
in this projector and PC system can be also selected manually.
Press MENU button and ON-SCREEN MENU will appear. Press
1
POINT LEFT/RIGHT buttons to move a red frame pointer to PC
SYSTEM Menu icon.
2 Press POINT DOWN button to move a red arrow pointer to
system that you want to set, and then press SELECT button.
26
AUTOMATIC MULTI-SCAN SYSTEM

SELECT COMPUTER SYSTEM MANUALLY

PC SYSTEM MENU
PC SYSTEM Menu icon
Displays system being
selected.
PC SYSTEM MENU
PC SYSTEM Menu icon
Displays system being selected.
Systems on this dialog box can
be selected.
Custom Mode (1~5) set in PC
ADJUST Menu. (P30)