Firmware: Reset Device To Factory Settings; Firmware: Reboot The Device - IFM Electronic AL1303 Operating Instructions Manual

ifm Operating Instructions IO-Link Master with PROFINET interface DataLine 8 Ports IP 65 / IP 66 / IP 67 / IP 69K (AL1303)
Configuration
8.1.9

Firmware: Reset device to factory settings

When the IO-Link master is reset, all parameters are set to the factory settings:
To reset the device to factory settings:
► Select [Firmware] menu.
> The menu page shows the current settings.
► Click on [Factory Reset] to reset the device.
> LR DEVICE sets the device to the factory settings.
>
8.1.10

Firmware: Reboot the device

When rebooting the device, all settings are kept.
To restart the AL1303:
► Select [Firmware] menu.
> The menu page shows the current settings.
► Click on [Reboot] to reboot the device.
> LR DEVICE reboots the ifm IO-Link master.
05 / 2018
LR DEVICE
7209
18105
31