Reset Io-Link Master To Factory Settings - IFM Electronic AL1122 Operating Instructions Manual

ifm Operating Instructions IO-Link Master with EtherNet/IP interface StandardLine 8 Ports IP 65 / IP 67 (AL1122)
Configuration
>
8.2.6

Reset IO-Link master to factory settings

When resetting the AL1122, all parameters are reset to the →
To reset the device to factory settings:
► Select [Setup] menu.
> The page shows the current settings.
► Click on [Factory Reset] to reset the AL1122.
> LR DEVICE sets the AL1122 factory settings.
Factory Settings
(→ p. 60)
2017-05-31
12740
39