Connections; Itch Connection - Denon DN-HC5000E2 Full Manual

ENGLISH

2 CONNECTIONS

1. ITCH Connection

CAUTION:
• Be sure to use the supplied control cord. Using another type of cable may result in damage.
• Be sure the power is off when connecting the control cord. Otherwise the units may not work properly.
RCA Cord
3.5 mm stereo mini cord
Deck1
Fader jack
Deck1 Output jack
CH4 Input jack CH6 Input jack
CH4 Fader jack CH6 Fader jack
DN-X900
DN-HC5000
3.5 mm stereo mini cord
X-control
Deck2
Fader jack
Deck2 Output jack
USB B terminal
2
ENGLISH
CONNECTION TO A PC
• The DN-HC5000 is a plug-and-play device.
This means that when the DN-HC5000 is first
connected to your computer, the driver is installed
automatically.
• To connect the DN-HC5000 and a PC via a usable
USB port, use the included USB cable.
• When connected, the display below appears at
the bottom right of the PC's screen.
RCA Cord
Found New Hardware
USB audio device
Once installation is completed, the message
"Your new hardware is installed and ready to
use." is displayed, as shown below.
Found New Hardware
Your new hardware is installed and ready to use.
Installation is now complete. The DN-HC5000 is
now usable.
CONNECTION TO A MACINTOSH COMPUTER
• The DN-HC5000 is plug-and-play device based on
the Macintosh OS, and is immediately ready for
use when connected.
• To connect the DN-HC5000 and Macintosh
computer via a usable USB port, use the included
USB cable.