Cd Player Connection - Denon DN-HC5000E2 Full Manual

PLEASE NOTE:
• These are the minimum requirements to run
ITCH with the Denon DJ DN-HC5000.
• For best performance and for use in professional
situations we recommend you buy a higher spec
computer.
Windows XP
• Intel processor, Pentium 4 mobile 2 GHz or
better
• 1 GB RAM
• 1024 x 768 screen resolution
• Service Pack 2 or higher
• Available USB Port
• Hard disk space for music
Windows Vista 32bit & 64bit
• Intel processor, Core Duo 1.6 GHz or better
• 1 GB RAM
• 1024 x 768 screen resolution
• Service Pack 1 or higher
• Available USB Port
• Hard disk space for music
Macintosh
• Intel processor, 1.6 GHz or better
• 1 GB RAM
• 1024 x 768 screen resolution
• OSX 10.4.11 or higher
• Available USB Port
• Hard disk space for music
• Windows is either a registered trademark or
trademark of Microsoft Corporation in the United
States and / or other countries.
• Macintosh is either a registered trademark or
trademark of Apple Incorporated in the United
States and / or other countries.

2. CD PLAYER Connection

CAUTION:
• Be sure to use the supplied control cord. Using another type of cable may result in damage.
• Be sure the power is off when connecting the control cord. Otherwise the units may not work properly.
1. Turn off the POWER switch.
2. Connect the RCA pin cords to the inputs on your mixer.
RCA Cord
3.5 mm stereo mini cord
DN-X900
CH2 Input jack
RCA Cord
CH2 Fader jack
3.5 mm stereo
mini cord
DN-D4000/
DN-D4500/
BU4500
Drive1 Fader jack
Drive1 Output jack
DN-HC5000
Deck1
Fader jack
Deck1 Output jack
CH4 Input jack CH6 Input jack
CH4 Fader jack CH6 Fader jack
3
ENGLISH
RCA Cord
3.5 mm stereo mini cord
X-control
CH8 Input jack
RCA Cord
CH8 Fader jack
3.5 mm stereo
mini cord
Drive2 Fader jack
Drive2 Output jack
DRIVE terminal
Deck2
Fader jack
Deck2 Output jack
ENGLISH