Table of Contents
Advertisement
E
N
Model assembly
Main wing installation
1.Slide the wing spars into the fuselage as shown.
2.Install the left and right wing halves over the wing spars and into the wing slots. Be sure the connectors on both sides
are attached precisely and firmly.
3.Secure the left and right wings to the fuselage using four screws included (HKM 3.0*10)
4.Attach the winglet to the corresponding slot on main wing, then slide toward the rear of the fuselage to lock in place.
HKM3.0 x 10mm
Ventral Fin installation
Attach the left and right ventral fins to the slots at the bottom of fuselage, then slide toward the rear of the
fuselage to lock in place.
5
Advertisement
Table of Contents
