Related Manuals for Dahua DH-IPC-HF8835F
Summary of Contents for Dahua DH-IPC-HF8835F
- Page 1 Dahua HD Box Network Camera Quick Start Guide Version 1.0.0 Zhejiang Dahua Vision Technology Co., LTD...
- Page 2 Welcome Thank you for purchasing our Network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference! Important Safeguards and Warnings 1．Electrical safety ...
- Page 3 3. Operation and Daily Maintenance Please do not touch the heat dissipation component of the device directly in order to avoid scald. Please do not dismantle the device; there is no component which can be fixed by users themselves in the machine.
- Page 4 Please contact the supplier or customer service if there is any problem occurred when using the device. Please contact the customer service for the latest procedure and supplementary documentation. There may be deviation between the actual value of some data and the value provided in the manual due to the reasons such as the real environment is not stable and so on.
-
Page 5: Table Of Contents
Table of Contents Device Structure ......................... 1 Rear Panel ........................1 Dimension ........................3 Bidirectional talk......................3 Alarm Setup ........................4 1.4.1 Alarm Input and Output Connection ................ 4 Device Installation ........................6 Lens Installation ......................6 2.1.1 Auto Iris Lens Installation..................6 2.1.2 Manual Iris Lens Installation ................... -
Page 6: Device Structure
1 Device Structure 1.1 Rear Panel Note: The figure is for reference only, which is used to know the functions of the rear panel. Different devices may have different structures of rear panel, please refer to the actual product for more details. See Figure 1-1. Figure 1-1 Please refer to the following sheet for detail information. - Page 7 Yellow light Detect the wireless device-yellow light is normally on. Ground end of RS232 serial port. RS232 port Sending end of RS232 serial port Receiving end of RS232 serial port RS484 port RS485_B port, control external PTZ etc. RS485_A port, control external PTZ etc. IR light port External IR light signal control port.
-
Page 8: Dimension
/OPT Network port /MB LAN: Connect to standard Ethernet cable and optical fiber port provide PoE power supply function. OPT: Transmit MB Ethernet data. SD card port Connect it to SD card. Please make sure the device is securely earthed to prevent the thunderstorm strike when using the device. -
Page 9: Alarm Setup
Log in the device WEB interface, click “Talk” button to enable bidirectional talk. You can see the button becomes orange after you enabled the audio talk function. Click “Talk” button again to stop the bidirectional talk function. Step 3 Input audio to speaker or MIC on the device end and PC respectively, and receive the audio via earphone on the device end and PC. - Page 10 Alarm input: When the input signal is idle or grounded, the device can collect the different statuses of the alarm input port. When the input signal is connected to the 3.3V or it is idle, the device collects the logic “1”. When the input signal is grounded, the device collects the logic “0”. Figure 1-4 Please refer to the following figure for alarm output information.
-
Page 11: Device Installation
2 Device Installation 2.1 Lens Installation Figure 2-1 2.1.1 Auto Iris Lens Installation Step 1 Remove the CCD protection cover on the device, aim the lens at the lens installation position, and turn the lens clockwise until it is installed firmly. Step 2 Insert the lens cable plug into the connector of auto iris lens on the camera side panel. -
Page 12: I/O Port Application
Step 5 After you completed the focus setup, use the slotted screwdriver to fix the screw firmly. Fasten the focusing ring. Now the installation completed. 2.2 I/O Port Application Figure 2-2 Install Cable: Step 1 Use the small slotted screwdriver to press the corresponding button of cable groove. Step 2 Insert the cable into the groove. -
Page 13: Network Configuration
3 Network Configuration The IP address of all the cameras is the same when leaving factory (default IP192.168.1.108), in order to make the camera get access to the network smoothly, please plan the useable IP segment reasonably according to the actual network environment. 3.1 Modify IP Address IP address can be acquired and modified through quick configuration tool for the cameras which are accessed via wired network, it needs to connect wired network to configure wireless... -
Page 14: Login Web Interface
Step 3 Modify the camera IP address on the “Net” interface, click “Save” to finish modification. See Figure 3-2 for more details. Figure 3-2 3.2 Login WEB Interface Note: Different devices may have different WEB interfaces, the figures below are just for reference, please refer to the document <<WEB Operation Manual>>... - Page 15 Figure 3-3 Step 3 Install controls according to the system prompt; see Figure 3-4 for the WEB main interface. Please modify the administrator password as soon as possible after you successfully logged in. Figure 3-4...
- Page 16 If there is any uncertainty or controversy, please refer to the final explanation of us. Please visit our website or contact your local service engineer for more information. Zhejiang Dahua Vision Technology Co., Ltd Address：No.1199 Bin’an Road, Binjiang District, Hangzhou, PRC. Postcode: 310053...
Need help?
Do you have a question about the DH-IPC-HF8835F and is the answer not in the manual?
Questions and answers