Gorenje Classico BO73CLI Instructions For Use Manual page 37

Program timer
display is blinking
Operation control
lamp is not lit...
• There was a power supply failure, or your cooker was just
connected to the power mains. All set times have been deleted.
• Set the time of day to enable operation of the appliance.
• After the end of program timer controlled operation (automatic
operation), the oven goes off , the time of day is displayed, and
an audible signal is emitted for a certain period of time. Take
the dish out of the oven, return the operation mode selection
knob and the temperature knob/dial back to the starting
position. Select the "Manual mode" function to be able to use
the oven in the conventional way (without the program timer).
• Did you activate all necessary controls?
• Did the main fuse in your home network trip?
• Are the temperature knob /dial and the operating mode
selection knob set properly?
If the problem persists despite observing the instructions
above, call an authorized service technician. Elimination of
any errors or warranty claims that resulted from improper
connection or use of the appliance is not covered by our
warranty. In such cases, the costs of repair are borne by
the user.
37