Setting The Minute Minder; Displaying The Setting; Deleting A Setting - Gorenje Classico BO73CLI Instructions For Use Manual

Setting the minute
minder

Displaying the setting

Deleting a setting

12
and confi rm it by pressing the (A) knob. The symbol for
the end of operation will start to fl ash (2).
• Set the stop time: Rotate the (A) knob to set the stop
time and confi rm it by pressing the (A) knob.
• The clock hands will turn to clock display. Symbols (1)
and (2) will be lit up.
• The timer will wait for the start of the cooking process.
• Set the oven – use the oven knobs to set the operating
mode and temperature.
• The oven will start to operate at the start time, and stop
operating at the stop time.
• When the clock reaches the selected stop time, the
oven will be switched off , which will also be indicated by
an intermittent acoustic signal. The acoustic signal can
be switched off by pressing the (A) knob; otherwise, it
will switch off automatically after 1 minute. The symbol
(2) will fl ash. To continue cooking, press the (A) knob
and hold it for 2 seconds, and set a new cooking time if
necessary.
The clock can also be used as a minute minder which will
sound an alarm upon expiry of a set amount of time.
The minute minder can only be selected when the
program timer is not programmed or in use.
• Select the (3) symbol by consecutively pressing the (A)
knob until the symbol starts to fl ash.
• Rotate the (A) knob to set the time when you wish the
minute minder to sound the alarm. The longest possible
setting is 3 hours.
• Confi rm the setting by pressing the (A) knob again.
Clock hands will automatically turn to lock display and
the symbol (3) will be lit up.
• When the time you set runs out, an intermittent acoustic
signal will be sounded. The acoustic signal can be
switched off by pressing the (A) knob and holding it
for 2 seconds; otherwise, it will switch off automatically
after 1 minute.
Whenever a timer function is set, you may check it by
pressing the (A) knob. The clock hands will briefl y move to
the set value and then return to display the current time.
Delete the setting by pressing the (A) knob and holding it
for 2 seconds. The symbol of the deleted function will be
switched off .