High Pressure Washer Prerequisites - EUROPRO X-Pro D200 User Manual

4. USE OF THE MACHINE

4.3. HIGH PRESSURE WASHER PREREQUISITES

• Control is carried out by the HP WASHER selector (18).
• The high pressure cleaner kit includes:
- the quick coupler for connecting the water supply
- the 10 m pressure hose, the gun and the lance
• Before switching on the washer, check that the water supply hose as well as the pressure hose and the
complete lance are connected.
It is essential for the proper functioning and longevity of the washer that it never operates
without water. Therefore, before starting the washer, it is imperative to open the water
supply valve of the supply source and check that there are no knots in the supply hose.
HOSES CONNECTION :
Under pressure outlet
Remember to clean the suction filter very regularly (at least once a week) to avoid cavitation
of the pump. The filter is located just behind the water inlet connection.
202203-577-ENG
Water inlet with Gardena type
connection
User manual - X-PRO D200 P15