Perlick SIGNATURE ADARA Series Installation Manual page 3

INSTALLATION OF DISPENSING EQUIPMENT
Open the tapping kit box and become familiar with its
components. The instructions on pages 4 through 10
will demonstrate how to properly install the tapping
equipment on your new Perlick Beer Dispenser.
All hose connections
use worm-drive
hose clamps (view
enlarged to verify)
Keg
Keg Coupler
NOTE: Image does not accurately reflect positions of the
different elements within the unit. Positions and hose lengths
shown are to clearly illustrate proper connection methods
only.
PERLICK RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT
Dispensing Head
Apply silicone to
bottom flange
Flange Sleeve
Beer Connection
Faucet Lead
Air Distributor
Distributor is only on
multiple keg units,
each keg is connected
to a valve on the air
distributor. Single keg
is connected directly to
the regulator.
perlick.com
3