Positioning, Fitting And Start-Up - Ecler essentials eMOTUS5ODWH User Manual

7. POSITIONING, FITTING AND START-UP

In the packing of eMOTU5OD, you will find all that is needed to complete installation of
the unit.
The following should be observed as general rules:
 Always install on solid, firm surfaces.
 For good sound reproduction, there should be no hindrance between the units and
the audience.
 Adjust the levels of sound pressure to reproduction requirements. Despite its small
size, the eMOTUS5OD has a performance far higher than that of domestic
loudspeakers.
Procedure for installing on a surface:
1. Make three 6 mm drill holes in the wall, lining them up with the position of the
holes in the bracket.
2. Insert three 6 mm wall plugs in these holes.
3. Fasten the safety line on the back of the bracket.
7