L2TPv3
5.2.6.3.
This page is used to configure the parameters for Internet network which connects to peer by L2TPv3.
Object
Local Host Address
Remote Host Address
Local Udp Port
Remote Udp Port
Tunnel Address
Remote Tunnel Address
Tunnel Id
Remote Tunnel Id
Session Id
Remote session Id
MTU
Figure 5-2-29 L2TPv3
Description
The address of the LAN side device of local , eg:192.168.0.2
The address of the LAN side device of remote host ,
eg:192.168.8.2
Lan side device udp port.
Remote device udp port
Wan interface ip address
Remote device wan interface ip address
Local device tunnel id
Remote device tunnel id
Local device session id
Remote device session id
You can keep the maximum transmission unit (MTU) as default.
-67-
User Manual of DWR-M960