D-Link DWR-M960 User Manual page 54

SSID
Channel Width
Control Sideband
Channel Number
BroadcastSSID
WMM
Associated Clients
Enable Universal Repeater
Mode
Set a name (SSID) for your wireless network. The ID of the
wireless network. User can access the wireless network through
it only. However, if you switch to Client Mode, this field becomes
the SSID of the AP you want to connect with.
Select a proper channel bandwidth to enhance wireless
performance. When there are 11b/g and 11n wireless clients,
please select the 802.11n mode of 20/40MHz frequency band.
Control channels are only applicable if your gateway is operating at
40 MHz bandwidth and the 802.11n mode is configured as
Automatic.
For an optimal wireless performance, you may select the least
interferential channel. It is advisable that you select an unused
channel or "Auto" to let device detect and select the best possible
channel for your wireless network to operate on from the drop-
down list.
You may choose to visible or invisible SSID broadcast. When it is
enabled, the router SSID will be broadcast in the wireless
network, so that it can be scanned by wireless clients and they
can join the wireless network with this SSID.
WMM provides basic Quality of service (QoS) features to IEEE
802.11 networks. WMM prioritizes traffic according to four
Access Categories: voice, video, best effort, and background.
This option shows you all the clients which connected to this
SSID.
Repeater mode
-57-
User Manual of DWR-M960