L2Tpv3 - D-Link DWR-921 User Manual

Enable: Enable or Disable L2TPv3.
Local Host Enter the Local IPv4 Address (0.0.0.0 will
Address:
obtain IP automatically according to L2TP
server settings).
Remote Host Enter Remote IPv4 address assigned by L2TP
Address: server.
Local Udp Port: Enter local L2TP server port.
Remote Udp Enter remote UDP port of the L2TP server.
Port:
Tunnel
Enter the L2TP server Address.
Address:
Remote Enter the Remote L2TP server Address.
Tunnel
Address:
Tunnel Id: Enter the Tunnel ID as per the L2TP server.
Remote Enter the Remote Tunnel ID as per the L2TP
Tunnel Id: server.
Session Id: Enter the Session ID as per the L2TP server.
Remote Enter the Remote Session ID as per the L2TP
session Id: sever.
MTU: Change the Maximum Transmission Unit
(default 1488).
D-Link DWR-921 User Manual

L2TPv3

2