Cleaning The Pre-Filter - Philips AC1386 User Manual

4
Clean the air quality sensor, the
dust inlet and the dust outlet with a
damp cotton swab.
5
Dry all parts thoroughly with a dry
cotton swab.
6
Reattach the air quality sensor
cover.
Note
• Always keep air quality cover closed
while the air purifier is working.

Cleaning the pre-filter

Clean the pre-filter when F0 is displayed
on the screen.
1
Switch off the air purifier and
unplug from the wall outlet.
2
Pull the bottom part of the front
panel to remove it from the air
purifier.
3
Press the two clips down (1) and
pull the pre-filter towards you (2).
4
If the pre-filter is very dirty, use a
soft brush to brush away the dust
. Then wash the pre-filter under
running tap water.
5
Allow the pre-filter to air dry
thoroughly before placing back in
the air purifier.
EN
33