Cleaning The Pre-Filter - Philips AC8685 User Manual

6
Reattach the air quality sensor
cover.

Cleaning the pre-filter

Clean the pre-filter when F0 is
displayed on the screen and the
pre-filter cleaning alert
1
Switch off the air purifier and
unplug from the power socket.
2
Pull the top part of the side
panel to remove it from the air
purifier.
3
4
is on
5
6
Press the two clips down and
pull the pre-filter towards you.
If the pre-filter is very dirty, use
a soft brush to brush away the
dust. Then wash the pre-filter
under running tap water.
Allow the pre-filter to air dry
thoroughly before placing back
in the air purifier.
Put the pre-filter back into the
air purifier.
EN
41