Loosening Documents; Placing Documents - Plustek PSD300 User Manual

Loosening Documents

Before loading documents into the ADF, loosen them as follows:
1. Fan the documents so that no two pages are sticking together. Make sure to
remove static electricity from paper.
2. Hold the documents upside down with both hands, and then gently push them
onto a flat surface to align the edges of all documents.
This will allow documents being fed into the ADF one at a time and prevent paper-feeding
errors.
P D
LACING OCUMENTS
1. Load the documents, headfirst and face down, toward the center of the ADF
paper chute and all the way into the ADF until touching the bottom.
For single-sided scans, load the documents face down so that the side to be
scanned faces towards the paper chute.
For double-sided scans, load the desired page order of documents face down so
that the side to be scanned faces towards the paper chute.
18