Step 2. Installing The Software - Plustek PSD300 User Manual

Step 2. Installing the Software

1. Switch on the scanner power from the rear of the scanner.
2. If the USB components on your computer are functioning correctly, they will
automatically detect the scanner causing the Add New Hardware Wizard or Found
New Hardware Wizard to be launched.
Information
3. For Windows 7:
When the Setup/Application DVD is for several scanner models
a. Insert the Setup/Application DVD-ROM, included with your scanner, into your
DVD-ROM drive. Click Run install.exe in the AutoPlay window.
b. Click on the Yes button if the User Account Control dialog pops up. Follow the
instructions in the pop-up installation message.
c. In the Device Manager window, right-click on this scanner under Other devices
and select Update Driver Software from the pop-up menu. Click Browse my
computer for driver software in the window that appears, and click the Browse
button.
d. In the Browse For Folder window, select the folder or the DVD-ROM drive that
contains this scanner's driver and click the OK button to return to the previous
screen. Click the Next button and click Install this driver software anyway if
the Windows Security window appears. Afterwards, please skip to procedure 5.
When the Setup/Application DVD is for one scanner model
a. Insert the Setup/Application DVD-ROM, included with your scanner, into your
DVD-ROM drive. Click Run install.exe in the AutoPlay window.
If your computer is off when the scanner is
connected, the "Add New Hardware Wizard"
message will not be displayed until the computer
is on and Windows starts.
10