Loosening Documents - Plustek SmartOffice PS186 User Manual

Attention

Loosening Documents

Before loading documents into the ADF, loosen them as follows:
1. Fan the documents so that no two pages are sticking together. Make sure to
remove static electricity from paper.
2. Hold the documents upside down with both hands, and then gently push them
onto a flat surface to align the edges of all documents.
This will allow documents being fed into the ADF one at a time and prevent paper-
feeding errors.
DO NOT use the ADF to scan photographic
sheets or particularly valuable document
originals; wrinkles or other damages can
happen in case of paper feeding errors.
DO NOT place paper with wet ink or
correction fluid into the ADF. Wait few minutes
for it to get dry.
17