A Note About Icons; Safety Precautions - Plustek PSD300 User Manual

A Note about Icons

This guide uses the following icons to point out information that deserves special
attention.
Warning
Attention
Information
S P
AFETY RECAUTIONS
Warning
1. Usage, the product is for indoor use in dry locations. Moisture condensation may
occur inside this device and cause malfunction at these conditions:
 when this device is moved directly from a cold to a warm location;
 after a cold room is heated;
 when this device is placed in a damp room.
To avoid the moisture condensation, you are recommended to follow the procedure:
i. Seal this device in a plastic bag for it to adapt to room conditions.
ii. Wait for 1-2 hours before removing this device from the bag.
2. Do use the AC adapter and USB cable provided with the scanner. Use of other AC
adapter and cables may lead to malfunction.
3. Keep the space around the AC adapter clear in case you need to quickly unplug the
AC adapter during emergencies.
4. Damaged wire could cause fire or electrical shock. Keep the power cord straight and
without being twisted, bended, or scraped.
5. Unplug this device if you don't need to use for a certain period of time, such as, during
night or long weekend, to avoid any risks of causing fire.
6. Do not attempt to disassemble the scanner. There is danger of an electrical shock
and opening your scanner will void your warranty.
7. Be sure not to bump or knock the scanner glass as it is fragile and could break.
A procedure that must be followed carefully to prevent
injury, or accidents.
Instructions that are important to remember and may
prevent mistakes.
Optional tips for your reference.
Before using this device, please read the following
important information to eliminate or reduce any
possibility of causing damage and personal injury.
2