Step 2. Installing The Software; Step 3. Install The Stacker - Plustek PN30U User Manual

5. If you plan to connect your scanner to a USB hub
connected to the USB port in your computer. Next, connect the scanner to the USB
hub.

Step 2. Installing the Software

1. Switch on the scanner power from the rear of the scanner.
2. Insert the Mac Setup/Application DVD-ROM, included with your scanner, into your
DVD-ROM drive and a [Plustek Scanner] DVD icon
your Mac OS X.
3. Double-click on the DVD icon, and a window will pop up displaying the file folder.
4. Double-click on the setup file [Setup], and the Scanner Installer will start to guide
you through the installation. Follow the on-screen guide in the installer window.
5. You will be prompted to enter your Mac administrator password. Enter the
password to continue the installation. Note: Only the Mac administrator can
perform the installation. Please make sure that you log in the Mac OS as an
administrator.
6. When the installation finishes, click the [Close] button to exit the installer.
Attention

Step 3. Install the Stacker

Insert the tabs on the stacker onto their slots on the scanner.
Information
4
The USB hub is not included with the scanner.
Save the Setup/Application DVD in case you
need to reinstall the driver and software in the
future.
The installation of stacker is optional, if you have
limited desktop space.
10
4
, make sure that the hub is
will show on the desktop of