3.1.18 Turning the priority function
ON/OFF
The priority function checks another channel (priority channel) every 5 seconds
while monitoring the current frequency. For the settings of the priority feature,
see "3.1.19 Selecting a priority option" (page 46), "3.1.20 Selecting a priority
channel" (page 47), and "3.1.21 Specifying a priority interval" (page 48).
• To turn the priority function ON
3
2
1
6
5
4
9
8
7
• Turn the priority feature OFF.
Press the
key, and then press the
F
"PRI" shown at the top of the screen will disappear showing that the priority
feature is turned OFF.
Note:
If the priority feature is ON, the CH SCOPE mode is disabled.
3.1.19 Selecting a priority option
Select an operation option of the DJ-X-2000, which is applicable if signals are
received on the priority channel when the priority feature is active.
1
Call up the PRIO menu.
3
2
1
Press the
key to display
F
PRIO
followed by the
key. PRIO
8
will appear at the top of the
display. This means the priority
function is ON.
PRIO
key with
8
Press the
key, and then
F
SET
press the
key with
HELP
shown on the display.
The PRIO menu will appear.
Point the arrow at +PRIO using the dial or UP/DOWN
key, and then press the
,
N
FM
A
1 4 5 . 3 4
b
8 .
shown on the display.
PR I O
PR I F REQ
PR I MODE
TF
key.
ENT
45