Basic Operations; Power Switch; Volume Control - Alinco DJ-X2000T Instruction Manual

2. Basic operations

This chapter describes the basic operations for the DJ-X2000.

2.1 POWER switch

To turn ON/OFF the DJ-X2000, perform the following operation:
• Turning ON
• Turning OFF
Hold down the POWER switch until the display goes out.
Note:

2.2 Volume control

Note:
Hold down the POWER switch for approx. 1 second until
the message "ALINCO INTELLIGENT RECEIVER" appears
on the display.
The message that appears on the display may be changed (see "3.1.12
Changing the initial message" on page 41).
To turn up the volume, press the
VOL key located on the left side of
the body, and then press the UP
key or turn the dial clockwise. To
turn down the volume, press the
VOL key, and then press the DOWN key or turn the dial
counterclockwise.
The bars on the display will increase/decrease with
the adjacent number changed between V00 and V32 as
you control the volume.
To disengage the squelch (the mute function) temporarily, press and hold
MONI
the key on the left panel. This will enable you to set the volume setting
without changing the squelch setting (see "2.3 Squelch control" page 21).
V 1 6
A 1 4 5 . 3 4
b 8 .
19