Osd Operation; Picture; Sound - Telefunken TF-LED32S13 Instruction Manual

OSD operation

1. Press MENU button to enter the main
menu.
2. Press LEFT/RIGHT cursor buttons on the
RC or VOL UP/DOWN buttons on the panel to
select a specific menu.
3. Press UP/DOWN cursor buttons or PR
UP/DOWN buttons on the panel to select a
specific item.
4. Press OK button on the RC or STANDBY
on the panel to enter the selected item.
5. Press cursor buttons on the RC or VOL
UP/DOWN or PR UP/DOWN buttons on the
panel to adjust the selected parameter.
6. Press MENU/EXIT to quit the menu.
Some menu items may be in grey color,
in this case they are not adjustable. Pictures
of OSD menu are for reference only; they may
differ from the real screens.

Picture

Picture Mode
Color Temperature
Display Mode
DNR
Backlight
PC
PICTURE
• Picture Mode: Normal/Soft/Personal/
Bright.
• Contrast
• Brightness
• Color
• Sharpness
• Tint: adjust the tone of color when your
system is in NTSC.
• Color Temperature: Neutral/Warm/Cool.
• Display mode: 16:9/4:3/Auto/Panorama/
Just Scan/Caption/Movie.
• DNR: select between four modes of digital
noise reduction available: High / Off / Low /
Middle.
• Backlight: Adjust peak brightness of the
backlight (Low / Middle / High)
• PC: Adjust the screen settings when the
TV is connected to a PC:
- Auto Adjust: adjust the screen size and
position.
- H.Position: adjust the horizontal position.
- V.Position: adjust the vertical position.
- Frequency: adjust the image frequency .
- Phase: adjust the image phase.

Sound

Sound Mode
Balance
AVL
Surround
SPDIF Mode
SOUND
• Sound Mode: Standard/Music/Film/News/
Personal.
• Balance: adjust balance between left and
right speakers.
• AVL: set the auto volume correction on/off.
It will level out the sound volume when sudden
changes in volume occur during commercial
breaks or channel change.
• Surround: set the surround sound effect
on or off.
• SPDIF Mode: toggle digital sound via
coaxial cable on/off.
Operation
9
11