Table of Contents
Advertisement
RACKING CONFIGURATION
Disperse your bottles evenly throughout the unit so as not to concentrate weight in any one area. This
also helps to provide an even temperature range throughout the unit. Make sure that bottles are not all
grouped together either at the top or bottom of the cabinet. The maximum capacity per shelf is 20kgs.
Never try to pull out more than one rolling shelf at a time as it can cause the appliance to tip forward. To
avoid damaging the door gasket, ensure that the door is fully opened when pulling the shelves out
of the rail compartment.
•
The slide-out shelves allow bottles of wine to be viewed
and removed more easily. You can remove a shelf to
accommodate larger diameter bottles on the shelf below it.
•
To remove a shelf, pull it out as far as you can. There are
levers on each side of the shelf near the rollers. Left the lever
on the left-hand side and push down the lever on the right-
hand side to remove the shelf from the tracks.
•
When removing the shelf from the rail compartment, make
sure to remove all items first. Then move the shelf to the
position where the notch of the shelf is exactly under the
plastic post and lift the shelf. In order to replace the shelf,
repeat steps described above in reverse.
MOVING RACKS
The shelves have smooth glide-out rollers that are adjustable in 1 1/4" increments to accommodate larger
bottles according to your needs. To move a sliding shelf, first remove all bottles, and then remove the
sliding shelf by sliding guides from walls, making sure not to mix up the right and left guides.
Then refit the sliding shelf as shown below:
These adjustable shelves allow you to customize the interior of the cabinet to accommodate your specific collection.
12
0
Advertisement
Table of Contents
