Remote Controller - LG AS10GDPB0 Owner's Manual

7
Insert the fi xing parts at the bottom of
the cover into the holes at the bottom
of the appliance before you close the
cover.
8
Remove the vinyl from the fi lter at the
lower part of the appliance in the same
way.
9
assemble the appliance in the reverse
order of disassembly after cleaning the
appliance and replacing the fi lter.
CAuTiON
• Failure to remove the supports may affect
the performance of the appliance. Please
be sure to remove it before use.
• Make sure that you remove the fi lter's
vinyl prior to use otherwise it may result in
appliance malfunction.
• Pay attention to the direction of the fi lter
when you install the fi lter otherwise it
may cause malfunction or failure of the
appliance.
12

remote Controller

inserting Battery
with the backside of the remote
1
controller facing up, remove the battery
tray from the remote controller.
2 Insert the battery provided with the
appliance to the tray.
• The (+) electrode of the battery must
face upward.
Insert the battery tray to the remote
3
controller.
Back
NOTe
• If the battery runs out of charge, replace it
with a new one (Cr2025).
• If the remote controller does not work as
expected, try to replace the battery or
check the polarity (+, -) of the battery. If
the problem continues, contact the service
Centre.
• Dispose of the used battery according to
the environmental regulations.