Table of Contents
Advertisement
XF40-Q1765 Explosion-Protected Fixed Network Camera
About PTZ (Pan Tilt Zoom)
About PTZ (Pan Tilt Zoom)
About preset positions
A preset position is a saved view that can be used to quickly steer the camera to a specific position. A preset position consists of
the following values:
•
Focus position (manual or automatic)
How to access the preset positions
Preset positions can be accessed in several ways:
•
When setting up action rules. See page 27.
How to add a preset position
Note
The focus window rectangle will disappear after a while, but the focus window will still be active.
1. Go to Setup > PTZ > Preset Positions.
2. Click in the image or use the controls to steer the camera view to the desired position.
3. To add a focus window, select Focus window. Place the mouse pointer on the part of the image that you want to focus on,
click and drag to create a rectangle around it and release the mouse button.
The rectangle will turn green when the focus window has been set. The camera will automatically adjust the image
focus to this area.
For more information about focus windows, see page 23.
4. Write a name in the Current position field.
5. Click Add to save the preset position.
How to include the preset position name in an overlay text
1. Go to Video.
2. Select Include overlay text.
3. Write the modifier #P in the field.
4. Click Save.
How to set the home position
About the focus window
The focus window makes it possible to select an area of the camera's image to which that focus should be applied. This can be useful
if there is a part of the image where focus is more critical, or if a part of the image should be ignored by the autofocus.
When the focus window is set from the Live View page, any change in the camera position will return the autofocus to the entire
window.
When clicking the Focus Window button in the preset position page, the most recently set focus window from the Live View
page appears.
23
Advertisement
Table of Contents
