Table of Contents
Advertisement
XP40-Q1765 Explosion-Protected PTZ Network Camera
About PTZ (Pan Tilt Zoom)
About PTZ (Pan Tilt Zoom)
The PTZ menu is available if a PTZ driver has been uploaded. See .
About preset positions
A preset position is a saved view that can be used to quickly steer the camera to a specific position. A preset position consists of
the following values:
•
Pan and tilt positions
•
Zoom position
•
Focus position (manual or automatic)
How to access the preset positions
Preset positions can be accessed in several ways:
•
By selecting the preset from the Preset positions drop-down list in the Live View Page.
•
When setting up action rules. See page 32.
•
When setting up guard tours. See page 27.
•
When setting up the Gatekeeper. See page 27.
How to add a preset position
Note
The focus window rectangle will disappear after a while, but the focus window will still be active.
1. Go to Setup > PTZ > Preset Positions.
2. Click in the image or use the controls to steer the camera view to the desired position.
3. To add a focus window, select Focus window. Place the mouse pointer on the part of the image that you want to focus on,
click and drag to create a rectangle around it and release the mouse button.
The rectangle will turn green when the focus window has been set. The camera will automatically adjust the image
focus to this area.
For more information about focus windows, see page 27.
4. Write a name in the Current position field.
5. If required, select Use current position as Home.
6. Click Add to save the preset position.
How to include the preset position name in an overlay text
1. Go to Video.
2. Select Include overlay text.
3. Write the modifier #P in the field.
4. Click Save.
26
Advertisement
Table of Contents
