Fitting And Removal Of Base : Prolite E2274Hds - Iiyama ProLite E2274HDS-2 User Manual

FITTING AND REMOVAL OF BASE : ProLite E2274HDS

 Put the monitor on a stable surface. The monitor may cause injury or damage if it falls
CAUTION
or is dropped.
 Do not give a strong impact to the monitor. It may cause damage.
 Unplug the monitor before removal or installation to avoid electric shock or damage.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
the monitor fl at on a table with front face down.
Hold the monitor and push the Stand until it clicks and is secure.
Hold the monitor and push the Stand-Base until it clicks and is secure.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
the monitor fl at on a table with front face down.
Press and hold the hooks inside, and pull the Stand-Base.
There are two locks inside of the Stand, unlock them by thin stick and pull the Stand away from the
monitor.
6 BEFORE YOU OPERATE THE MONITOR
Stand
Hooks
Stand-Base
Thin stick