Using The Network Settings - Sony SNC-VB770/K3 Application Manual

Using the Network settings

1
Select a device you want to assign an IP address to
from the list and click Network.
The account settings screen is displayed.
2
Register the name and password of the
administrator and click OK.
The factory settings for both items are "admin".
The Network Setting screen is displayed.
3
Set the IP address.
To obtain the IP address automatically from a
DHCP server:
Select Obtain IP address automatically.
The IP address, Subnet mask and Default gateway
are assigned automatically.
Note
When you select Obtain IP address
automatically, make sure that the DHCP server is
operating on the network.
8
Using the SNC toolbox
To specify the IP address manually:
Select Use the following IP address, and type the
IP address, Subnet mask and Default gateway in the
relevant boxes.
4
Set the DNS server address.
To obtain the DNS server addresses
automatically:
Select Obtain DNS server address automatically.
To specify the DNS server addresses manually:
Select Use the following DNS server address, and
type the Primary DNS server address and
Secondary DNS server address in the relevant
boxes.
5
Set the HTTP port No.
Normally, select 80 for the HTTP port No. To use
another port number, type a port number between
1024 and 65535 in the text box.
Note
When using a port number other than 80, check
with the network administrator first.
6
Confirm that all items are correctly set, then click
OK.
If Setting OK is displayed, the IP address is
correctly assigned.
7
When setting is finished, to access the device
directly, double-click the device name in the list.
The viewer screen of the network device is
displayed on the Web browser.
Note
If the IP address is not set correctly, the viewer does not
appear after step 7. There is a possibility that the device
cannot be searched for. In that case, try to set the IP
address again.