Starting A Warm Engine; Jump-Starting - Yamaha RHINO YXR660FW Owner's Manual

1. Jumper cable positive lead
2. Jumper cable negative lead
1. Câble de démarrage positif
1. Cable auxiliar positivo
2. Câble de démarrage négatif
2. Cable auxiliar negativo

Starting a warm engine

To start a warm engine, refer to the "Starting a cold
engine" section. The starter (choke) should not be
used. Press the accelerator pedal slightly.

Jump-starting

Jump-starting the vehicle should be avoided. The
battery should be removed and charged instead.
However, if the vehicle must be jump-started, pro-
ceed as follows.
1. Turn the key to "OFF".
2. Open the hood. (See pages 8-17–8-19 for
hood opening and closing procedures.)
3. Remove the battery compartment cover.
4. Using a charged 12 V battery, connect the
positive lead of the jumper cable to the posi-
tive terminal of the battery in the vehicle and
the other end of the positive lead to the posi-
tive terminal of the charged battery.
6-9
EVU00550
EVU00561