Starting A Warm Engine; Operating The Drive Select Lever And Driving In Reverse - Yamaha GRIZZLY 350 2016 Installation Manual

EBU20292

Starting a warm engine

Follow the same procedure as for starting a cold
engine, with the exception that the starter (choke)
is not required when the engine is warm. Instead,
start the engine with the throttle slightly open.
EBU20384
Operating the drive select lever and
driving in reverse
ECB00171
NOTICE
6
Before shifting, stop the ATV, otherwise the
transmission may be damaged.
Shifting: Forward
1. Bring the ATV to a complete stop.
2. Apply the brake pedal.
3. Shift from neutral to forward and vice versa
by moving the drive select lever along the
shift guide.
TIP
Make sure that the drive select lever is completely
shifted into position.
1. Drive select lever
2. F (Forward)
3. N (Neutral)
4. R (Reverse)
4. Release the brake pedal, and then open the
throttle lever gradually.
Shifting: Reverse
EWB00721
WARNING
Improper operation in reverse could make you
hit an obstacle or even a person behind you,
resulting in serious injury. When you shift into
6-3
1
F 2
N 3
R 4