Console - Yamaha RHINO YXR660FW Owner's Manual

1. Console

1. Console
1. Consola
Console
To remove
1. Remove the seats. (See page 4-45 for seat
removal and installation procedures.)
2. Remove the parking brake lever boot.
3. Pull the console upward (the drive select le-
ver boot will come loose).
To install
1. Place the console in its original position.
2. Install the parking brake lever boot.
3. Install the seats.
CAUTION:
_
G
When installing the console, be sure not to
pinch the cables or wires.
G
Make sure that the groove at the bottom of
the parking brake lever boot and the drive
select lever boot fits securely around the
edge of the hole in the console.
_
8-21
EVU00691