Download Print this page

HP TFT7600 Installation Instructions page 3

Rackmount keyboard and monitor
Hide thumbs Also See for TFT7600:

Advertisement

Slide the brace rail assembly in between the HP 1U
4.
Adjustable Toolless Rails from the rear of the rack.
Align the screw holes on the brace rail with the screw
5.
holes on the HP 1U Adjustable Toolless Rails.
Secure the brace rail to the HP 1U Adjustable Toolless
6.
Rails with two 6-32 screws.
Remove the two shipping screws from the rear of the
7.
HP TFT7600 and discard the screws.
Attach the cable management arm to the rear of the
8.
unit with two 6-32 screws, supplied in the kit.
Connect and route the cables through the cable
9.
management arm and unit opening.
Installation is complete.

Advertisement

loading