Advertisement
Display Installation
Attach Display Brackets (item V below) to Display by using either the supplied
screws or the screws specified by the Display manufacturer (item 2 below). Install
Brackets "ears out" as shown.
Next, insert the four Shoulder Washers (item 3 below) through the four aligning Key-
hole Slots (item 4 below) in the Display Header. Complete the installation by inserting
and tightening the two locking screws (item H below) through the Display Header
and into the Display Brackets.
Ears out
LIMITED WARRANTY FOR COMMERCIAL VIDEO DISPLAY STANDS AND MOUNTS
Salamander is proud to stand behind our products with industry-leading warranties. Should you ever encounter
any problem with your Salamander product, let us know. We are here to make it right. 1.800.535.5659 - 860.761.9500
Full warranty including limitations and warranty claim information may be found at:
www.salamandercommercial.com/warranty
Salamander Designs - Electric Lift, Wall Display Stands Designed for Surface
Attach Display Brackets (item 1 below) to Display by using either the supplied screws or the screws specified by
the Display manufacturer (item 2 below). Install Brackets "ears out" as shown.
Next, insert the four Shoulder Washers (item 3 below) through the four aligning Keyhole Slots (item 4 below)
in the Display Header. Complete the installation by inserting and tightening the two locking screws (item 5 below)
through the Display Header and into the Display Brackets.
3
www.salamandercommercial.com
1
Display
Header
4
2
Completed
Assembly
501-685-MS [10.21]
H
5
page 10 of 24
Advertisement
