Water Supplier And Drain - Technika Bellissimo TBD4SS-6 User Manual

Position the appliance
Position the appliance in the desired location. The back
should rest against the wall behind it, and the sides,
along the addjacent cabinets or walls. The dishwasher
is equipped with water supply and drain hoses that can
be positioned either to the right or left sides to facilitate
proper installation.
Levelling he appliance
Once the appliance is positioned for levelling, the height of the dishwasher may be altered via
adjustment of the screwing level of the feet. In any case, the appliance should not be inclined
more than 2.
Water Supply and Drain
Cold water connection
Connect the cold water supply hose to a threaded 3/4 inch
connector and make sure that it is fastened tightly in place.
If the water pipes are new or have not been used for an
extended period of time, let the water run to make sure that
the water is clear. This precaution is needed to avoid the risk
of the water inlet to be blocked and damage the appliance.
Warning
The appliance is to be connected to the water mains using new hose sets and that old hose-
sets should not be reused.
INSTALLATION INSTRUCTIONS
PG 9