Drain Hose Connection - Technika TDX6SS-5 Instruction Manual

n n
Improper connection of the equipment earthing conductor can result in the risk of an
WARNING! WARNING!
electric shock.
n n
Check with a qualified electrician or service representative if you are in doubt whether the
appliance is properly earthed.
n n
Do not modify the plug provided with the appliance. If the plug does not fit properly to the
outlet, please have a qualified electrician to install a proper outlet.
Water Connection Water Connection
Cold Water Connection
WARNING! WARNING!

Drain hose Connection

Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink, making sure to
avoid bending or crimping it. The top of the hose must be less than 1000mm.
for personal safety:
n n
DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.
n n
DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE
CONNECTION FROM THE POWER CORD.
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure
that it is fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time, let the
water run to make sure that the water is clear. This precaution is needed to avoid the
risk of the water inlet to be blocked and damage the appliance.
Please close the hydrant after using.
13 13
EARTHING