Calibrating the Touch Screen Using the iNexio Calibration Tool for
Windows XP Portrait Mode only
If it becomes necessary to calibrate the touch screen after installing the iNexio software:
1.
Go to Start > All Programs > iNexio and select HIDcal. The HIDcal dialog will appear on the
screen.
2.
Click the Manual button to open the calibration window.
3.
Touch the crosshairs in each corner of the screen as directed.
Calibrating the Touch Screen
It is not necessary to calibrate the touch screen when you initially begin using it. However, it may
become necessary at some point. To calibrate the touch screen:
1.
On the Windows 7 desktop, go to Start > Control Panel > Hardware and Sound > Tablet PC
Settings.
2.
On the Tablet PC Settings' Display tab, press the Calibrate button. The calibration window will
be displayed
3.
On the calibration window, tap the crosshairs each time they appear in the corners of the screen.
When complete, a dialog box will appear asking if you want to save the calibration data.
4.
Select Yes on the dialog box to save the calibration data and close the calibration window.
Customizing the Touch Screen
You can customize the touch settings in Microsoft Windows 7 to align with you personal preferences.
For example, you can change the menus to appear on the right side or left side of the screen based
on whether you write with your left hand or right hand by going to Start > Control Panel > Hardware
and Sound > Tablet PC Settings and selecting the Other tab.
You can further customize the touch settings by going to Start > Control Panel > Hardware and
Sound > Pen and Touch. The Pen and Touch dialog allows you to:
●
adjust the settings for each pen action
●
change navigational flick settings
●
change settings for handwriting personalization
●
adjust settings for each touch action
●
adjust touch panning gestures
ENWW
Calibrating the Touch Screen
33